Faculties information

Start exploring our faculties

NameDr. SELVABHARATHI R
DesignationProfessor/Principal
QualificationM.E., Ph.D
AICTE ID
Area of InterestWelding Technology
Emailprincipal@rvce.ac.in
Teaching Exp15.4
Research Exp1
Date of Joining2026-01-02

Qualification

DegreeSpecializationClassYearCollegeUniversity
B.E Mechanical Engineering First 2010 PSR Engineering college Anna university
M.E Engineering Design First 2012 MNSK Engineering college Anna university
Ph.D Welding Technology First 2018 Sethu institute of Technology Anna university

Courses Handled

Course Code/NameYear/SemesterDepartment

Journals Published

  • Dr. SELVABHARATHI R, "Influence of shot peening and plasma ion nitriding on tensile strength of 2205 duplex stainless steel using A-PAW", Materials Science and Engineering: A, 2018
  • Dr. SELVABHARATHI R, "Studies on the Parametric Effects of Plasma Arc Welding of 2205 Duplex Stainless Steel", High Temperature Materials and Processes, 2018
  • Dr. SELVABHARATHI R, "Effect of post weld heat treatment and TiAlSiN coating on the tensile strength of autogenous plasma arc welding of duplex/ super austenitic stainless steels", Journal of manufacturing process, 2019
  • Dr. SELVABHARATHI R, "Influence of high-velocity oxygen fuel spraying and plasma nitriding on microstructure properties of iron-nickel-chromium alloy using hybrid surface heat treatment", Materials Research Express, 2019
  • Dr. SELVABHARATHI R, "Influence of filler wires and high velocity oxygen fuel coating on the structural properties of Inconel 600 and Nickel alloy 800 HT dissimilar joints using autogenous cold …", Materials Research Express, 2019
  • Dr. SELVABHARATHI R, "Influence of severe double shot peening on microstructure properties of Ti 6Al-4V and Titanium Grade 2 dissimilar joints using laser beam welding", Optics & Laser Technology, 2020
  • Dr. SELVABHARATHI R, "Influence of Plasma Transfer Arc Cladding of NiCrBFe filler powder on microstructure and tensile properties of Titanium Grade 2 and Ti 6Al-4V alloy dissimilar joint prepared by …", Optics & Laser Technology, 2020
  • Dr. SELVABHARATHI R, "Investigation of performance, combustion, and emission characteristics of diesel engine equipped with exhaust gas recirculation using ceria and zirconia nanoparticles-blended …", Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2020
  • Dr. SELVABHARATHI R, "Influence of severe shot peening and Plasma spray FeCr18Ni10Mo3 coating on microstructure and mechanical properties of super austenite stainless steel sheets by laser beam welding", Journal of Materials Research and Technology, 2021
  • Dr. SELVABHARATHI R, "Influence of optimization techniques and nano surface coating materials on microstructure of iron-nickel-chromium alloy using wire EDM process", Materials Science-Poland, 2021
  • Dr. SELVABHARATHI R, " Influence of laser surface hardening on low cycle fatigue performance of homogeneous-structure super austenitic stainless sheets by laser beam welding", Optik, 2022
  • Dr. SELVABHARATHI R, "Author Correction: Influence of Severe Double‑Shot Peening and Plasma Spray Arc TiAlCr/AlCrSi Coating on Tribological Behaviour of Pure Aluminium Alloy", Journal of Inorganic and Organometallic Polymers and Materials, 2022
  • Dr. SELVABHARATHI R, "Influence of plasma spray WCCrCNi coating and shot peening on surface properties and corrosion behavior of AZ31 Mg alloy", Journal of Materials Research and Technology, 2022
  • Dr. SELVABHARATHI R, "Effect on Ti/Mg isothermal oxidation of refinement microstructure and tribological behaviour of pure aluminium alloy by plasma spray coating", SAGE Publications, 2023
  • Dr. SELVABHARATHI R, "Effect of one-step dipping coating process on microstructure and tribology of polypropylene/graphene oxide/carbon nanotube nanocomposites", Iranian Polymer Journal, 2023
  • Dr. SELVABHARATHI R, "Mechanical and free vibrational analysis of silane functionalized aluminum stacked glass fiber/epoxy laminates", The Journal of Adhesion, 2023
  • Dr. SELVABHARATHI R, "Microstructure and corrosion resistance of 23Cr9Ni4Mo2Mn filler duplex stainless steel 2205 fabricated by wire arc additive manufacturing with subsequent severe shot peening …", Materials Today Communications, 2023
  • Dr. SELVABHARATHI R, "Enhancement on the low-pressure shot peened process of monotonic plastic deformation behaviors of Ni–4Cu–3Mo alloy/super austenite stainless steel dissimilar joints using laser …", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024
  • Dr. SELVABHARATHI R, "Enhanced interlaminar structure and dynamic mechanical properties of Tectona grandis fiber (TGF)/polypropylene fiber (PPF)/carbon nanotube (CNT) nano composite prepared solid …", Journal of Polymer Engineering, 2024
  • Dr. SELVABHARATHI R, "Influence of microstructure and tribology properties on deep-dipping coating method of sappanwood (SW)/polyvinyl alcohol (PVA)/Polyethylene (PE)/Aluminium nitride (AlN) natural …", Journal of Polymer Research, 2024
  • Dr. SELVABHARATHI R, " Effect on one-type dipping coating method of microstructure and physical properties of Indian almond fiber (IAF)/titanium oxide (TiO2)/zirconium oxide (Zr2O3)/carbon nanotube …", Biomass Conversion and Biorefinery, 2024
  • Dr. SELVABHARATHI R, "Influence of Ni Alloy Content on Ni–BiFeO3 Crystal Pole Phase and Tribology of Laser (Fe–Co–Mn)X–Si–Cr–Mo Claddings Coating by FeCrMnX(0.5) Stainless …", International Journal of Precision Engineering and Manufacturing, 2025
  • Dr. SELVABHARATHI R, "Effects of shot peening and low heat input nitriding on microstructural and tribo-corrosive properties of selective laser Ti-6Al-2Sn-4Zr-2Mo alloy", Canadian Metallurgical Quarterly, 2025
  • Dr. SELVABHARATHI R, "Effect on deep cryogenic cycling treatment and combined double-sided laser shock peening with coating of microstructure evolution and mechanical properties of annealing Ti-6Al …", Canadian metallurgical quarterly, 2025
  • Dr. SELVABHARATHI R, "Effect of NiFe2O4 Phase and tribological properties on Vacuum plasma spray Cr3C2+25NiCr coating ER 2205 - 66Co26Cr5WC filler high-strength alloy plate fabricated by wire arc …", Journal of the Taiwan Institute of Chemical Engineers, 2025
  • Dr. SELVABHARATHI R, "Improving the strength-ductility synergy and surface properties of NiFe29Cr21CuMo-based alloy laser welding subsequent deep cryogenic treatment and vacuum plasma WC20Cr3C …", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2025
  • Dr. SELVABHARATHI R, "Microstructure and tribo-corrosion of NiCuFe alloy by laser surface texture and double layer glow plasma surface with FeCrAlY coating", Canadian Metallurgical Quarterly, 2025
  • Dr. SELVABHARATHI R, "Influence on microstructure and surface properties of FeCrMo filler-Nickel based alloy by wire arc additive manufacturing with severe shot peening and physical vapour …", Canadian Metallurgical Quarterly, 2026
  • Dr. SELVABHARATHI R, "Effect of isothermal annealing and plasma arc coating on mechanical properties for titanium stainless steel using laser welding", Canadian Metallurgical Quarterly, 2026
  • Dr. SELVABHARATHI R, "Influence of Microstructure and Dynamic Properties on Standard Dipping Coating on Recycling Polyvinyl Alcohol Fiber/Silicon Nitride Fiber/Reduced Carbon Nano for Composite …", Journal of Polymer Materials, 2026
  • Dr. SELVABHARATHI R, "Effect of Zinc Borate ( B2O6Zn3) on Microstructure and Properties of Chopped Basalt Fiber‑Reinforced Epoxy‑Based Composites", Fibers and Polymers, 2026

Conferences Attended

TypePaper TitleDatePlaceConference Title

Books Published

TitleYearPublisher

Book Chapters

Book TitleChapter TitleYearPublisher

Events Organized

TypeCategoryDateTitle

Programs Attended

TypeFromToTitlePlace

Memberships

NameNumberType

Patents

TitleInventorsPatent No.Date of GrantCountry